IT self care

Installing a new RAM memory should be an easy straight-forward process if you follow few steps. If you find yourself unable to follow these simple steps, please DO NOT attempt to install any new hardware on your machine or you may end up burning down your house.

Rule no. 1: Chose the right type of RAM memory for your machine. You may check your motherboard manual to find what type of RAM it supports (DDR, DDR2, DDR3). If you somehow got the wrong type of RAM memory, DO NOT attempt to make it fit the slot (don’t laugh, I’ve seen it before: RAM chopped off to fit in). In the most fortunate case, your system will not start if you do this.

Rule no. 2: Unplug your machine from any power supply… that of course if you’re not the suicidal type or extreme sports addict. In this case you may wanna try inserting the RAM memory while your machine is running.

After you followed the above 2 rules, you need to follow these easy steps:

• Open the case by unscrewing the 2 screws on the back of your computer.
• Scan with you eyes and locate accurately the empty RAM slots.
• Press the security clips on both ends of the RAM slot.
• Grab the RAM memory from its case and try as much as possible NOT to touch its lower part with your hands.
• Line up the notch of the RAM with the tab on the slot. If it doesn’t fit, turn the RAM module by 180 degrees and try to line up again. If it still doesn’t fit, you broke the no. 1 rule.
• Press the RAM module into place by applying firm pressure on both ends until you hear a *click*. That means the security clips snapped into place and you can check it with your fingers to see if they snapped all the way back.
• Close the computer case and connect the power cords.
• Power up the system.
• That’s all!

Related posts:

1. Install power supply and motherboard
2. Install Intel Core2Quad processor on your motherboard
3. Install a video graphic card